Application:

The surfaces to be bonded must be dry, stable, fixed, level and clean. Wetting the surfaces with water is recommended before applying the nadhesive. Wet substrates that are covered by a film of water and substrates with standing water are not suitable. The optimum temperature of the spray can for the application is 20 – 25 °C.
The PU adhesive should be applied to 1 m² of insulation
material in 3 horizontal lines that should be evenly spaced from one another. The individually applied lines should have minimum diameter of 30 mm. The edge lines may not be more than 3 – 5 cm away from the edge of the panels to be fixed. Adjustment can take place up to 10 – 15 minutes after application.
The precise dosage of the polyurethane adhesive enables less consumption. An insulation layer of 8 – 12 m2 can be affixed with the contents of one can.
Owing to the variety of applications and working conditions we recommend pretests for all areas of application.

Suitable substrates:

• bituminous surfaces, sanded and unsanded
• Chipboards (coarse + fine)
• Concrete
• Wood
• Brick
• Metal
• Plywood

Technical specifications:

Accessories:

Product	Part No.	Figure
PU-Foam Gun with 60 cm lance	9970 0087